Introduction
LOGIQ 500 Basic Users Manual
2276612–100 Rev. 0
7–2
Introduction
Overview
Measurements and calculations derived from ultrasound
images are intended to supplement other clinical procedures
available to the attending physician. The accuracy of
measurements is not only determined by system accuracy, but
also by the use of proper medical protocols by the user. When
appropriate, be sure to note any protocols associated with a
particular measurement or calculation. Formulas and
databases used within the system software that are associated
with specific investigators are so noted. Be sure to refer to the
original article describing the investigator’s recommended
clinical procedures.
Measurements can be made in all modes and image formats,
including real-time, freeze, CINE or VCR playback. The
selected exam category defines the default calculations
displayed on the Softkey Sub-Menu.
Measurement values update on the display until the
measurement has been completed. 18 lines of measurements
can be displayed on the screen at one time.
The measurement cursor is not automatically fixed when the
Record key is pressed. Record all desired measurements
displayed on the screen before erasing them.
Summary of Contents for 500
Page 1: ... ...