Doppler
LOGIQ 500 Basic Users Manual
2276612–100 Rev. 0
5–65
PW Doppler Mode Sub-Menu Page 1 (cont’d)
Slant Scan
Description
Slant Scan in Doppler imaging is used to control the position of the Doppler cursor for
LINEAR PROBES ONLY. (Also found in the CWD soft menu.)
When Slant Scan is selected while in a B-Mode display, the B-Mode is not effected.
Only the Doppler cursor will show at a slant.
The Doppler angle remains constant in relation to the anatomy when slant scan
direction is changed.
Benefits
Provides a Doppler cursor suitable for linear probe operation.
Values
+ (Left), 0 (Center) and – (Right). See Figure 5–28 and Figure 5–29.
Pre-processing function.
0 (Center)
– (Right)
+ (Left)
Figure 5–28. Slant Scan Cursor Selections
Figure 5–29. B-Mode Display with Slant Selection
Summary of Contents for 500
Page 1: ... ...