Powering On the System
LOGIQ 500 Basic Users Manual
2276612–100 Rev. 0
3–20
Power Up Sequence (cont’d)
NOTE: If errors occur, an error message appears at the bottom
of the screen. See User Maintenance, Troubleshooting
for more information.
If problems occur, freeze the image and take a picture
for reference. This will help if there is a need to call for
service.
S
Probes are initialized for immediate operation.
NOTE: If no probes are connected, the system goes into
standby mode.
S
Peripheral devices are activated on power up.
After initialization has been completed, the new patient entry
menu will be displayed.
Password Protection
A maximum of eight personal IDs and associated passwords
can be preset in the LOGIQ
500 (see
14–65
).
If IDs and passwords have been entered and the Password Ask
parameter is on, the following occurs in the power up sequence:
S
The message USERID:__________ appears in the middle
of the start up sequence.
S
Type in a User ID and press Return.
S
Keyboard lights go out.
S
The message PASSWORD:__________ is highlighted.
S
Type in the password that corresponds to the User ID and
press Return.
.
Hints
.
Summary of Contents for 500
Page 1: ... ...