manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 370 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 370

Recording Images

LOGIQ     500 Basic Users Manual

2276612–100  Rev. 0

13–6

Black/White Video Page Printer

Operations

Remote control of the B/W printer is limited to the print function
only.  Adjustments to print quality are done on the page printer.
No status or error messages are available to be displayed on
the LOGIQ

 500.

There is a six second delay built in to the Record key
recognition.  This eliminates improper operation if the Record
key is pressed more than once in rapid succession.

To print an image:

Press Freeze to stop image acquisition.

NOTE:  Remember that Cine Scroll may be used to look at
previous image frames to obtain the best image.

Press Record 1 to activate the print function on the standard
B/W Video Page Printer.

NOTE:  The Record 1 and Record 2 keys can be preset to
activate almost any peripheral device.  This is done by
assigning the key control to the output port to which the
peripheral is attached in the Set Up/System Parameters menu
page 5.

For details on the page printer operation, consult the Sony
Operator Manual provided with the printer.

.

"

A

.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments