System Care and Maintenance
LOGIQ 500 Basic Users Manual
2276612–100 Rev. 0
16–15
Cleaning the system (cont’d)
Foot Switch
To clean the foot switch:
1.
Moisten a soft, non-abrasive folded cloth with a mild,
general purpose, non
-
abrasive soap and water
solution.
2.
Wipe the external surfaces of the unit then dry with a
soft, clean, cloth.
VCR
To clean the VCR:
1.
Turn off the VCR power. If possible, disconnect the
power cord.
2.
Wipe the external surfaces of the unit with a soft, clean,
dry cloth.
NOTE: Do not use a wet cloth or any cleaning fluid because it
may enter and damage the unit.
3.
Clean the record and playback heads with a soft,
non
-
abrasive cleaning system, according to the
manufacturer’s instructions.
See the VCR’s Operator Manual.
Multi Image Camera
To clean the MIC:
1.
Moisten a soft, non-abrasive folded cloth with a mild,
general purpose, non
-
abrasive soap and water
solution.
2.
Wipe down the top, front, back, and both sides of the
unit.
Review the Multi Image Camera’s Operator Manual for details.
For more
information
For more
information
Summary of Contents for 500
Page 1: ... ...