Home
/
GE Medical Systems
/
500
/
User Manual

GE Medical Systems 500, User Manual, Page: 90 / 636

Share

Page: 90 / 636

GE Medical Systems 500 User Manual Download Page 90

Probes

LOGIQ 500 Basic Users Manual

2276612–100 Rev. 0

3–32



Cable Handling

Take the following precautions with probe cables:

Keep free from wheels

Do not bend the cable acutely

Avoid crossing cables between probes.

Activating the Probe

To activate the probe, press the Probe Select key that
corresponds to the probe port to which the desired probe is
connected. The Single CWD key is used to activate the
dedicated continuous wave Doppler (CWD) probe.

Figure 3–18. Probe Select Keys

Key Light Indicators:

Dark—no probe attached to probe port.

Half Bright—probe attached to probe port but not active.

Brightly Lit—probe attached to probe port and is active.

The probe activates in the currently selected operating mode.
The probe’s default settings for the mode and selected
application are used automatically.

CWD Mode, split Crystal or Doppler-Only CW probes are
options available on the LOGIQ



500.

«
...
88
89
90
91
92
...
»

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments