manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 187 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 187

M–Mode

LOGIQ    500 Basic Users Manual
2276612–100  Rev. 0

5–75

Optimizing the Timeline

Common Controls

Description

Since M-Mode is basically a single B-Mode scan vector
displayed over time, basic controls that affect the B-Mode
display also affect the M-Mode display.

Acoustic output, TGC, depth and B/M Gain affect both the
M-Mode and B-Mode displays.

Scan area size, scan area position and reverse affect B-Mode
only.

If the scan area size is reduced and the position changed, the
M-Mode cursor will follow the position change to stay within the
displayed scan area.

The Dual Format Keys (L–R) work the same as in dual B-Mode,
but display both B-Mode and M-Mode on the left and right side
of the screen.

Accessing/Changing

See the 

B-Mode

 section of this chapter for details on these

controls.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments