Home
/
GE Medical Systems
/
500
/
User Manual

GE Medical Systems 500, User Manual, Page: 390 / 636

Share

Page: 390 / 636

GE Medical Systems 500 User Manual Download Page 390

Recording Images

LOGIQ 500 Basic Users Manual

2276612–100 Rev. 0

13–26



Disk Verification

In order to protect images from being deleted by other
LOGIQ



500 systems, the disk is always verified by the system

before it can be used.

If the MO disk is not inserted into the drive or an unformatted
MO disk is inserted, the following message is displayed:

“MEDIA IS EITHER UNMOUNTED OR UNFORMATTED.”

When a disk is inserted into a drive, the system first reads the
MO (disk ID) and System ID from the media. These two IDs
are displayed at the bottom of the monitor while the system
verifies that they are registered in the verification list on the
system hard drive.

«
...
388
389
390
391
392
...
»

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments