Safety Precautions
LOGIQ 500 Basic Users Manual
2276612–100 Rev. 0
2–17
Acoustic Output
Controls Affecting Output
The potential for producing mechanical or thermal bioeffects is
influenced by the controls listed below (refer to
2–18
).
Direct.
The Acoustic Output control has the most significant
effect on Acoustic Output.
Indirect.
Indirect effects may occur when adjusting the controls
listed on
2–18
.
Always observe the output display for possible effects.
Best practices while scanning
S
Raise the Acoustic Output only after attempting image
optimization with controls that have no affect on Acoustic
Output, such as Gain and TGC.
NOTE: Refer to the Optimization sections of the Modes chapter
for a complete discussion of each control.
Be sure to have read and understood control explanations for
each Mode intended to be used before attempting to adjust the
Acoustic Output control or any control that can affect Acoustic
Output.
Use the minimum necessary output to get the best diagnostic
image or measurement during an examination. Begin the exam
with the probe that provides an optimum focal depth and
penetration.
Hints
.
WARNING
Acoustic
Output
Hazard
Summary of Contents for 500
Page 1: ... ...