manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 514 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 514

Probe Overview

LOGIQ     500 Basic Users Manual

2276612–100  Rev. 0

15–2

Probe Overview

Ergonomics

Probes have been ergonomically designed to:

Handle and manipulate with ease

Connect to the system with one hand

Be lightweight and balanced

Have rounded edges and smooth surfaces.

Cables have been designed to:

Connect to system with appropriate cable length

Stand up to typical wear by cleaning and disinfectant
agents, contact with approved gel, etc.

Cable handling

Take the following precautions with probe cables:

Keep free from wheels

Do not bend the cable acutely

Avoid crossing cables between probes.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments