manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 422 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 422

Custom Display

LOGIQ     500 Basic Users Manual

2276612–100  Rev. 0

14–18

Page 2 of 20 (Imaging Parameter 2 – Probe Dependent 2) (cont’d)

B Rejection     EC, UP, P, R

Choose the B-Mode rejection default level.

Level from 0 to 40 in 1 digit increments.

B Focus Combi Number     EC, UP, P, R

Choose the default number of focus points in B-Mode.

1, 2, 3 or 4.

If Range is selected as B Combi Focus Width, the maximum number is 3.

B Combi Focus Width    EC, UP, P

Choose the default width between focus points in B-Mode.

Narrow

Focal points close together.

Normal

Focal point at nominal distance.

Wide

Focal points far apart.

Range

Improves near field resolution as well as that of the transmit focal zone set by 
‘Focus Position’.   Maximum number of displayed, moveable focus markers is 3.

B Angle/Width   [deg, mm]     EC, UP, P, R

Choose the amount of the scan angle to display as a default for B-Mode.

The amount or degrees available depends on the probe.

B Target Frame Rate     EC, UP, P

Choose the default value for B-Mode frame rate.

Low

Low frame rate, better resolution.

Mid

Mid range frame rate and resolution.

High

Higher frame rate, less resolution.

THI of F1&F2 Key      EC, UP, R,  P

Choose the default tissue harmonic level (T1 or T2) when assigning the THI function to
either the F1 or F2 key.

THI_1 or THI_2.

B Lateral Resolution Level        EC, UP, R,  P

Choose the default B lateral resolution level when the Image Frequency selection is set
to Resolution.

NOTE:  This is available for the C358, S317, S222, 3S and CS probes.

Normal

Normal resolution.

Fine.

Best lateral resolution.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments