manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 32 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 32

Safety Precautions

LOGIQ     500 Basic Users Manual

2276612–100  Rev. 0

 2–2

Safety Precautions

Precaution Levels

Icon Description

Various levels of safety precautions may be found on the
equipment and different levels of concern are identified by one
of the following flag words which precede the precautionary
statement.

Indicates that a specific hazard is known to exist which through
inappropriate conditions or actions will cause:

S

Severe or fatal personal injury

S

Substantial property damage.

Indicates that a specific hazard is known to exist which through
inappropriate conditions or actions may cause:

S

Severe personal injury

S

Substantial property damage.

Indicates that a potential hazard may exist which through
inappropriate conditions or actions will or can cause:

S

Minor injury

S

Property damage.

Indicates precautions or prudent use recommendations that
should be used in the operation of the ultrasound system,
specifically:

S

Use of the ultrasound system as a prescription device,
under the order of a physician

S

Maintaining an optimum system environment

S

Using this Manual

S

Notes to emphasize or clarify a point.

DANGER

WARNING

CAUTION

.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments