Home
/
GE Medical Systems
/
500
/
User Manual

GE Medical Systems 500, User Manual, Page: 200 / 636

Share

Page: 200 / 636

GE Medical Systems 500 User Manual Download Page 200

Zooming an Image

LOGIQ 500 Basic Users Manual

2276612–100 Rev. 0

6–2



Zooming an Image

Introduction

Zoom is used to magnify a specified region of interest (ROI).
The system adjusts all imaging parameters accordingly.
Decreasing the size of the ROI increases the magnification
factor.

Cine and VCR playback images must be frozen to be zoomed.

Zoom Methods

The LOGIQ



500 offers two types of zoom capabilities,

Acoustic (real-time) Zoom and Display (freeze) Zoom.

Acoustic Zoom

Acoustic Zoom is accomplished while scanning live (real-time).

While scanning, press the Zoom key to activate the zoom
function.

Rotate the Zoom Size control to the desired magnification. The
magnification choices available are:

1.2, 1.5 (default), 2.0, 2.5, 3.0 and 4.0

The default value can be set in Set Up/Custom Display page 1
“Zoom Factor”.

Use the Trackball to position the zoom region of interest.

Press Clear or Zoom to cancel the zoom function.

Zoom

Clear

«
...
198
199
200
201
202
...
»

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments