GE Medical Systems 500, User Manual, Page: 458 / 636

System Parameters
LOGIQ 500 Basic Users Manual
2276612–100 Rev. 0
14–54

Page 1 of 7 (System Setup) (cont’d)
System Error Erase Interval
Set the time that a system error message is displayed on the monitor before it is erased.
0.1, 1, 10 minutes or infinity.
Infinity is until the next error occurs.
Display Probe Name
Choose to display the names of the probes attached to the console in the soft menu
when an available Probe Select key is pressed.
On or Off.
Page 2 of 7 (System Setup)
Setup Blue Back Start
Choose to display a color for the background of the preset menus. Color is set by Col
BackGnd.
Off Background is transparent.
On Display a colored background.
Mask Image Characters
Choose to mask (disable) the graphic characters on the image display.
On or Off.
PCG Filter
Choose the desired level of PCG (Physiological Signal) filtering.
Low Low level filtering.
Mid1 Medium level filtering.
Delay Trigger Source
Choose the source for the cardiac trigger delay.
ECG Electrocardiogram input.
AUX Auxiliary signal input.