Mode Measurements
LOGIQ 500 Basic Users Manual
2276612–100 Rev. 0
7–8
Distance Measurement (cont’d)
Press Measurement to toggle between which cursor is
activate.
Press Clear once to erase the second measuring marker and
the current data measured and start the measurement again.
Press Set to complete the measurement and fix the Distance
value displayed on the bottom part of the screen.
Pressing Clear after the sequence is complete erases all data
that has been measured to this point, but not data entered on to
report pages.
Circumference/Area (Ellipse) Measurement
An ellipse can also be used to measure the circumference and
area of an organ. To measure with an ellipse:
Press Measurement to set up the measurement mode. The
“
” cursor appears on the display.
Use the Trackball to move the “
” cursor to either end of the
major axis of the area to measure.
Press Set to fix the start point cursor.
Use the Trackball to move the second cursor to the major axis
measurement end point.
Hints
(continued)
Summary of Contents for 500
Page 1: ... ...