manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 423 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 423

Custom Display

LOGIQ    500 Basic Users Manual
2276612–100  Rev. 0

14–19

Page 3 of 20 (Imaging Parameter 3 – Probe Dependent 3)

Timeline Sweep Speed     EC, UP, P, R

Choose the default value for the timeline (M-Mode and Doppler spectrum) sweep speed.

Slow

16 microseconds per pixel

Mid

8 microseconds per pixel

Fast

4 microseconds per pixel

Very-Fast*

2 microseconds per pixel

* Works with Doppler only, not M-Mode or M/D-Modes.

Physio Sweep Speed on B     EC, UP, P, R

Choose the default value for the physio signal sweep speed displayed on the B-Mode
image.

Slow

16 microseconds per pixel

Mid

8 microseconds per pixel

Fast

4 microseconds per pixel

M Gain (Delta from B)     EC, UP, P, R

Choose the default value for M-Mode gain difference from the B-Mode Gain.

Value from –98 to 98 in 2 digit increments.

M Dynamic Range     EC, UP, P, R

Choose the M-Mode dynamic range default value.

Value from 30 to 90 in 6 digit increments.

M Edge Enhance     EC, UP, P, R

Choose the M-Mode edge enhancement default level.

Off, Low, Mid or High.

M Image Softener     EC, UP, P, R

Choose the M-Mode image softener function default.

On or Off.

M Softener Level     EC, UP, P, R

Choose the M-Mode image softener default level.

Low, Mid or High.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments