manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 149 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 149

Adding Color

LOGIQ    500 Basic Users Manual
2276612–100  Rev. 0

5–37

CFM Mode Sub-Menu Page 1 (cont’d)

Diag Mode

Color Flow MTI Filter

Description

Allows for the selection of the best color flow display
format.  The 4 methods are:

Survey Mode (Svy)—The Survey Mode
is the default Diag Mode display and is
common for each of the 2 programs.
The Survey Mode displays the B/W
B-Mode image and has an adjustable,
full depth CF wedge that can be steered
with the Trackball.

Survey/Detail Mode (SvyDtl)—The
Survey/Detail Mode displays a high
resolution color flow window that is half
the depth of the B-Mode image.  The CF
wedge is adjustable horizontally and

ÇÇ

ÇÇ

ÇÇ

ÇÇ

ÇÇ

ÇÇ

Filters out low flow velocity
color.  This minimizes
motion artifacts caused
from breathing.

edge s adjustab e o

o ta y a d

vertically and can be steered within the
full B-Mode image with the Trackball.

Map Mode (Map)—In the Map Mode,
the B-Mode image and the color flow are
the same size.  The Map Mode offers
higher CF frame rates and a full size
adjustable CF wedge.

Map/Detail Mode (MapDtl)—The Detail
Mode shows a high resolution, high
frame rate color flow window that is half
of the B-Mode depth.  The B-Mode and
the CF are the same adjustable angle.

ÇÇ

ÇÇ

ÇÇ

ÇÇ

ÇÇ

ÇÇ

Benefits

Gives the operator a choice of CFM displays to optimize
scanning.

Filters out the lowest
velocities (colors).

Values

4 sequences are available in the Set Up/Custom Display
menu page 17:

Survey>Map>Map/Detail

Survey>Survey/Detail

Survey>Survey/Detail>Map

Survey/Detail>Map/Detail

Pre-processing function.

Values are Low, M1, M2,
M3, M4 and High.

Pre-processing function.

Affects on 
Other Controls

Display frame rate could be improved by minimized gray
scale B-Mode image size or CFM window size.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments