manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 589 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 589

Troubleshooting

LOGIQ    500 Basic Users Manual
2276612–100  Rev. 0

16–23

To Save Trouble Images to MOD (cont’d)

Trouble image files must be saved one at a time.

Enter the number of the file (i.e. “01”) and press Return.

The message 

“Saving now”

 is displayed.

The system will take a few moments to save the image file.

After the save operation is complete, the message 

“Press

‘Y’ to continue,  or  ‘Ctrl+R’ to return.”

 is displayed.  Pressing

‘Y’ will prompt for another file menu number to be saved.
Pressing Ctrl+R will return to the previous menu screen.

Figure 16–7.  Trouble Image Save Complete

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments