manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 23 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 23

System Overview

LOGIQ    500 Basic Users Manual
2276612–100  Rev. 0

1–5

Contraindications

The system is NOT intended for use in the following areas:

Ophthalmic use (or any use causing the acoustic beam to pass
through the eye).

Pulsed Wave Doppler, Continuous Wave Doppler, Color Flow
Doppler, and Color M-Mode are not intended for routine fetal
examination or screening nor are they intended for fetal
examination in a low-risk population.  The use of Doppler, even
at minimal output levels, in fetal examination must be adjunctive
with conventional fetal echocardiography and other clinical
diagnostic methods, for high risk patients only.

Prescription Device

Caution: United States law restricts this device to sale or use by
or on the order of a physician.

For USA

Only

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments