manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 242 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 242

Mode Measurements

LOGIQ     500 Basic Users Manual

2276612–100  Rev. 0

7–14

Doppler Mode Measurements

4 basic measurements can be made in Doppler Mode or the
Doppler Spectrum portion of the display.

Peak Velocity

TAMAX

/

TAMIN/TAMEAN/TAMODE (Manual or Auto Trace)

Two Velocities with the Slope and Time Interval between
them.

Time Interval

Peak Velocity

To measure peak velocity:

Press Measurement.  The “

” cursor with a  vertical dotted line

appears.

Use the Trackball to move the cursor to the desired point of
measurement in the Doppler Spectrum.

Press Set to fix the velocity cursor.  The velocity measurement
in m/s or cm/s will be displayed at the bottom of the screen.

The 

“Velocity Unit”

 preset, located on Preset Program page 3,

allows the unit of display for all velocity measurements to be
selected.

The 

“Display MaxPG with Velocity”

 preset, located on Preset

Program page 4, allows MaxPG to be displayed with the Peak
Velocity measurement.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments