manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 578 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 578

System Care and Maintenance

LOGIQ     500 Basic Users Manual

2276612–100  Rev. 0

16–12

Weekly Maintenance

The LOGIQ

 500 system requires weekly care and

maintenance to function safely and properly.  Clean the
following:

S

System cabinet

S

Monitor

S

Operator control panel

S

Foot switch

S

Video Cassette Recorder (VCR)

S

Multi Imaging Camera (MIC)

S

Video Page Printer

Failure to perform required maintenance may result in
unnecessary service calls.

Cleaning the system

Prior to cleaning any part of the system:

1.

Turn off the system power.

System cabinet

To clean the system cabinet:

1.

Moisten a soft, non-abrasive folded cloth with a mild,
general purpose, non

-

abrasive soap and water

solution.

2.

Wipe down the top, front, back, and both sides of the
system cabinet.

NOTE: Do not spray any liquid directly into the unit.

.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments