manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 70 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 70

System Positioning/Transporting

LOGIQ     500 Basic Users Manual

2276612–100  Rev. 0

3–12

System Positioning/Transporting

Moving the System

When moving or transporting the system, follow the precautions
below to ensure the maximum safety for personnel, the system,
and other equipment.

Before moving the system:

1.

Turn the system power switch off.

2.

Unplug the power cord.

3.

All cables from off-board peripheral devices (IIE
camera, external printer, VCR, etc.) must be
disconnected from the console.

4.

Ensure that no loose items are left on the console.

5.

Loop the cord around the handle on the back of the
system or wrap the cord in a bundle and store it behind
the rear storage panel.

To prevent damage to the Power Cord, DO NOT pull
excessively on the cord or make sharp bends while wrapping.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments