System Positioning/Transporting
LOGIQ 500 Basic Users Manual
2276612–100 Rev. 0
3–14
Moving the System (cont’d)
When moving the system:
1.
Always use the rear handle grips to move the system.
2.
Take extra care when moving the system long
distances and on inclines. Ask for help if necessary.
Avoid ramps that are steeper than ten degrees to avoid
tipping over the
system.
NOTE: Wheel chair ramps are usually less than five degrees.
Utilize additional care and personnel when moving on
steep incline (>5
°
) or loading into a vehicle for
transport.
NOTE: DO NOT attempt to move the console using any cables
or fixtures, such as the probe connectors.
3.
Use the brake, located on the bottom of the system in
the front, when necessary.
4.
Do not let the system strike walls or door frames.
5.
Use extra care when crossing door or elevator
thresholds.
6.
Once the destination is reached, lock the wheels.
The system weighs approximately 180 kg (397 lbs). To avoid
possible injury and equipment damage:
S
Be sure the pathway is clear.
S
Limit movement to a slow careful walk.
S
Use two or more persons to move the system on inclines or
long distances.
.
.
CAUTION
Summary of Contents for 500
Page 1: ... ...