GE Medical Systems 500, User Manual, Page: 480 / 636

Preset Program
LOGIQ 500 Basic Users Manual
2276612–100 Rev. 0
14–76

Page 4 of 10 (Application – Measurement) (cont’d)
PPSA Coefficient (2) EC, UP
Set the desired default PPSA Coefficient for the second PPSA calculation on the
Urology Report page.
Coefficient from 0.01 to 0.99.
Display MaxPG with Velocity EC, UP
Choose the default for displaying MaxPG with peak velocity.
Off or On.
Arrow Mark Display EC, UP
Choose the default for displaying the arrow mark when the Measurement key is pressed
a certain number of times. See Table 7–1 on
7–5 for more details.
Off or On.
% Stenosis Calculation EC, UP
In Advanced Vascular, choose the default measurement type for calculating % Stenosis.
Area or Distance.
CAUTION: If this preset is changed, the previous % Stenosis measurement results will be erased.
B Auto Caliper Control EC, UP
Choose the location of the caliper for subsequent measurements while in B-Mode.
Off The caliper is not displayed after a measurement is performed.
On The caliper is in the home position.
1’st The caliper is positioned at the previous measurement’s first cursor
position.
2’nd The caliper is positioned at the previous measurement’s second cursor
position.
M Auto Caliper Control EC, UP
Choose the location of the caliper for subsequent measurements while in M-Mode.
Off The caliper is not displayed after a measurement is performed.
On The caliper is in the home position.
1’st The caliper is positioned at the previous measurement’s first cursor
position.
2’nd The caliper is positioned at the previous measurement’s second cursor
position.
D Auto Caliper Control EC, UP
Choose the location of the caliper for subsequent measurements while in Doppler Mode.
Off The caliper is not displayed after a measurement is performed.
On The caliper is in the home position.
1’st The caliper is positioned at the previous measurement’s first cursor
position.
2’nd The caliper is positioned at the previous measurement’s second cursor
position.