manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 532 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 532

Probe Overview

LOGIQ     500 Basic Users Manual

2276612–100  Rev. 0

15–20

Coupling gels

Do not use unrecommended gels (lubricants).  They may
damage the probe and void the warranty.

Applying

In order to assure optimal transmission of energy between the
patient and probe, a conductive gel or couplant must be applied
liberally to the patient where scanning will be performed.

Precautions

Coupling gels should not contain the following ingredients as
they are known to cause probe damage:

Methanol, ethanol, isopropanol, or any other alcohol-based
product

Mineral oil

Iodine

Lotions

Lanolin

Aloe Vera

Olive Oil

Methyl or Ethyl Parabens (para hydroxybenzoic acid)

Dimethylsilicone

Planned Maintenance

The following maintenance schedule is suggested for the
system and probes to ensure optimum operation and safety.

Do the Following

Daily

After Each Use

As Necessary

Inspect the Probes

X

Clean the Probes

X

Disinfect Probes

X

Table 15–6.  Planned Maintenance Program

CAUTION

CAUTION

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments