manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 428 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 428

Custom Display

LOGIQ     500 Basic Users Manual

2276612–100  Rev. 0

14–24

Page 6 of 20 (Imaging Parameter 6 – Probe Dependent 6)

CFM Color Threshold     EC, UP, P, R

Choose a priority level for B-Mode display during CFM mode.  The higher the number,
the greater the emphasis on CFM Mode (color) verses B-Mode (gray scale).

Level from 0 to 100 in 1 digit increments.

CFM Threshold Velocity     EC, UP, P, R

Choose the level above which color will no longer be used to display velocity.

Level from 0 to 25 in 1 digit increments.

CFM Threshold Turbulence     EC, UP, P, R

Choose the level above which color will no longer be used to display turbulence.

Level from 0 to 100 in 1 digit increments.

CFM Wall Echo Canceller     EC, UP, P, R

Choose the initial default setting of the wall echo cancel function.

On or Off.

CFM/PDI Spatial Filter     EC, UP, P

Choose the desired amount of averaging between color pixels.

Off, 1, 2, 3, 4, or 5.

CFM Target Frame Rate     EC, UP, P

Choose the desired frame rate range while in CFM mode.

Density

Lowest frame rate for high color density

Low

Low frame rate for CFM.

Mid

Medium frame rate for CFM.

High

High frame rate for low color density.

CFM Target Frame Rate Dtl     EC, UP, P

Choose the desired frame rate range while in the Detail (Dtl) Mode of CFM presentation.

Density

Lowest frame rate for high color density

Low

Low frame rate for CFM Detail Mode.

Mid

Medium frame rate for CFM Detail Mode.

High

High frame rate for CFM Detail Mode.

CFM Packet Size Survey, Map, SrvyDtl and MpDtl     EC, UP, P

Choose the default packet size for each CFM diagnostic mode display.  This will be for
Survey Mode, Map Mode, Survey-Detail Mode and Map-Detail Mode.

Very-Small

Very Small packet size.

Small

Small packet size.

Mid

Medium packet size.

Large

Large packet size.

NOTE:  The larger the packet size, the better the color presentation but with a slower
frame rate.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments