GE Medical Systems 500 User Manual Download Page 36

Page: 36 / 636

Safety Precautions

LOGIQ 500 Basic Users Manual

2276612–100 Rev. 0

2–6



Equipment and Personnel Safety

Related Hazards

This equipment contains dangerous voltages that are capable
of serious injury or death.

There are no user serviceable components inside the console.
Refer all servicing to qualified service personnel only.

The concerns listed below can seriously affect the safety of
equipment and personnel during a diagnostic ultrasound
examination.

Risk of explosion if used in the presence of flammable
anesthetics.

To avoid injury:

Do not remove protective covers. No user serviceable
parts are inside. Refer servicing to qualified service
personnel.

To assure adequate grounding, connect the attachment
plug to a reliable (hospital grade) grounding outlet (having
equalization conductor

Do not place liquids on or above the console. Spilled liquid
may contact live parts and increase the risk of shock.

The system must be supplied from an adequately rated
electrical circuit. The capacity of the supply circuit must be as
specified on

3–4

WARNING

DANGER

Explosion

Hazard

Electrical

Hazard

Smoke

& Fire

Hazard

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 500

Reviews:

GE Medical Systems 500, User Manual, Page: 36 / 636

Search results

Summary of Contents for 500

Reviews: