manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 297 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 297

OB Summary Reports

LOGIQ    500 Basic Users Manual
2276612–100  Rev. 0

 9–35

Recording Summary Reports

The summary report can be saved like any ultrasound image.
Once it is displayed on the screen, it can be recorded on the
VCR, printed on the B/W or color page printer, photographed by
the multi-image camera, stored on a MOD with the Image
Archive option or placed on regular paper with a line printer.

Line Printer Operation

USA Only

Refer to 

13–21

 for details on line printer operation.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments