manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 205 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 205

Freezing an Image

LOGIQ    500 Basic Users Manual
2276612–100  Rev. 0

6–7

Freezing an Image (Freeze Key)

To freeze an image:

S

Press Freeze.  The key backlights.

NOTE:  If both B- and M-Modes are active, the B-Mode and
timeline trace stops immediately.  Use the Cine Scroll Control to
start CINE review.

To reactivate the image:

S

Press Freeze again.  Deactivating Freeze restarts the
B-Mode and timeline after a black and white bar indicating
discontinuity is inserted in the timeline (M-Mode Display).

NOTE:  Deactivating Freeze erases all measurements and
calculations from the display (but not from the report page).

Selecting a new probe unfreezes the image.

Freezing an Image (Foot Switch option)

Toggle Freeze on and off by pressing the foot switch.  Pressing
the left foot switch backlights the Freeze key on the console.

.

.

Foot Switch

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments