manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 44 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 44

Safety Precautions

LOGIQ     500 Basic Users Manual

2276612–100  Rev. 0

 2–14

Classifications (cont’d)

4.3 General Notice (cont’d)

2.

Notice against User Modification

The user should never modify this product.  User
modifications may cause degradation in EMC
performance.

Modification of the product includes changes in:

a.

Cables (length, material, wiring, etc.)

b.

System installation/layout

c.

System configuration/components

d.

Securing system parts (cover open/close, cover
screwing)

3.

Operate the system with all covers closed.  If a cover is
opened for some reason, be sure to shut it before
starting/resuming operation.

Operating the system with any cover open may affect
EMC performance.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments