manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 182 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 182

Doppler

LOGIQ     500 Basic Users Manual

2276612–100  Rev. 0

5–70

PW Doppler Mode Sub-Menu Page 4

Compo

Preset

PWD

Trace

Method

Calc

Dir.

Realtim

Trace

Set Up

ECG

PEAK

OFF

30

Dynamic

Range

Figure 5–32.  PW Doppler Mode Sub-Menu Page 4

Realtime Trace

Calc Dir.

Description

Automatically traces (real-time) the
parameter selected in the Set Up/Custom
Display Menu page 15.  The choices are
Peak, Floor, Mean, and Mode.  (Also found
in the CWD soft menu.)

Choose which part of the Doppler Trace
will be used for automatic measurements/
calculations.  (Also found in the CWD soft
menu.)

Benefits

No need to manually trace a selected
value.  Measurements and calculations will
be automatic.

Easy access to change which portion of
the Doppler Trace is used for automatic
measurements/calculations.

Values

OFF

RealTime Trace is turned off.

ON

RealTime Trace is active.

NOTE: If the Realtime Doppler Calculation
option is not installed, the CALC selection
will not be available.

CALC

RealTime Trace is active and
measurements/calculations are
displayed.

Trace and calculations are done internally,
even if RealTime Trace is turned off.  After
the image is frozen, change the RealTime
Trace to ON or CALC to display the trace
and calculations.

Compo

Composite—Uses both forward
and reverse flow data.

Fored

Forward—Trace only data
towards the transducer.

Revrs

Reverse—Trace only data away
from the transducer.

Hints

The best Doppler data is collected when
parallel to flow, with orientation also
parallel to the anatomic target; whereas,
the best B-Mode image data is collected
perpendicular to the anatomic target.
Therefore, there usually is not both an
ideal B-Mode image and ideal Doppler
data simultaneously.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments