Mode Measurements
LOGIQ 500 Basic Users Manual
2276612–100 Rev. 0
7–17
Slope/Time Interval
Two velocity values, the time interval (sec) and slope (m/s
2
) can
be measured by:
Press Measurement three times. A “
” cursor with vertical
dotted lines appears.
Use the Trackball to move the cursor to the measurement start
point.
Press Set to fix the start point.
Use the Trackball to move the end cursor to the measurement
end point.
Press Set to complete the measurement.
The two peak end point velocities, time interval and slope are
displayed.
Summary of Contents for 500
Page 1: ... ...