GE Medical Systems 500 User Manual Download Page 28

Page: 28 / 636

How This Book is Organized

LOGIQ 500 Basic Users Manual

2276612–100 Rev. 0

1–10



How This Book is Organized

Manual Content

The LOGIQ



500 Basic User Manual is organized to provide

the information needed to start scanning right away. Detailed
information is also provided for more time-intensive studies.

Getting started. These sections give an overview of the
system to help the operator start scanning as soon as
possible.

Introduction.

Information concerning indications/

contraindications for use, who to contact and how this
documentation is organized.

Safety

. Important information concerning the safe

operation of the LOGIQ



500 system.

Preparing the System for Use.

How to prepare the

system for use and a map of the control layout.

Preparing for an Exam.

How to enter patient

information, select an exam category and application
preset.

Image optimization. These sections detail how to improve
image, trace, or spectral information.

Modes

. How to adjust and optimize B-Mode, Color

Flow, Doppler, M-Mode, 3-DvieW and 3D-Surface
imaging.

Scanning and Display Functions.

Information

concerning Zoom, Freeze, Cine and Annotation
functions.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 500

Reviews:

GE Medical Systems 500, User Manual, Page: 28 / 636

Search results

Summary of Contents for 500

Reviews: