OB Measurements and Formulas
LOGIQ 500 Basic Users Manual
2276612–100 Rev. 0
9–23
User-Programmed Calculations (Tables)
User-programmed calculation tables are displayed in the
measurement menus only after they are entered by the user.
The User Table Editor is found in the Set Up/Preset Program
Menu page 7. Refer to
14–80
on how to define these user
selections and program the user tables.
Select Locatn
This choice is used to select 1 of 3 locations at which S/D (D/S)
Ratio, A/B Ratio, RI and PI can be taken and recorded on the
report page.
The locations are numbered 1, 2 and 3 as a default from the
factory. However, the user can customize each location
designation with a 6 character name. This customization edit is
done in any report page that displays S/D (D/S) Ratio, A/B
Ratio, RI or PI. Changes will be permanently saved even after
system power down.
Up to three measurements can be taken for S/D (D/S) Ratio,
A/B Ratio, RI or PI. The latest value or measurement average
can be reported. Averaging depends upon the average activity
preset selection in the Set Up/Preset Program page 3.
Press the Select Locatn rocker switch to change the location
number as necessary.
Transf CALCS is only available with Realtime Doppler Calculation option installed
Select
Locatn
D/S
Ratio
RI
TRACE
AUTO
Transf
CALCs
PI
1
A/B
Ratio
Figure 9–5. European OB Calculation Sub-Menu
Summary of Contents for 500
Page 1: ... ...