manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 577 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 577

System Care and Maintenance

LOGIQ    500 Basic Users Manual
2276612–100  Rev. 0

16–11

System Care and Maintenance

Overview

Refer to Section 7 of the LOGIQ

 500 Service Manual

(P9030TA) for any additional maintenance guidance.

Contact the local Service Representative for parts or planned
maintenance inspections.  It is recommended that planned
maintenance be performed on the system every six months.

Inspecting the System

Examine the following on a monthly basis:

Connectors on cables for any mechanical defects.

Entire length of electrical and power cables for cuts or
abrasions.

Equipment for loose or missing hardware.

Control panel and keyboard for defects.

Casters for proper locking operation.

To avoid electrical shock hazard, do not remove panels or
covers from console.  This servicing must be performed by
qualified service personnel.  Failure to do so could cause
serious injury.

If any defects are observed or malfunctions occur, do not
operate the equipment but inform a qualified service person.
Contact a Service Representative for information.

DANGER

Electrical

Hazard

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments