manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 303 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 303

OB Graphs

LOGIQ    500 Basic Users Manual
2276612–100  Rev. 0

 9–41

Changing OB Graph Selection

After the OB graph has been displayed, the user can change or
select which measurement parameter is to be used to display a
graph.

Highlight CHANGE GRAPH and press Return.  The graphic is
deleted and a measurement selection menu appears.

Select the desired measurement value and press Return.  The
new measurements, calculations and graphic are displayed.

Exit OB Graph

Select OB Graph in the OB Calculation Sub-Menu.

The user is not allowed to edit any field on the OB Graph
display except the Comments section.  Comments on the OB
Graph page are different from any other OB Report Page.

If the Pregnancy Origin Data Selection is not entered on the
Patient Entry Menu screen, the mark (*) indicating the current
status of the fetus will not be displayed on the graph.

Hints

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments