GE Medical Systems 500 User Manual Download Page 418

Page: 418 / 636

Custom Display

LOGIQ 500 Basic Users Manual

2276612–100 Rev. 0

14–14



Page 1 of 20 (Imaging Parameter 1 – Probe Dependent 1)

Enter Depth

EC, UP, P, R

Choose the desired default display depth for the probe indicated.

4, 5, 6, 7, 8, 10, 12, 14, 16, 18, 20, 22 or 24 cm.

Focus Depth [mm]

EC, UP, P, R

Choose the desired default focus depth for the probe indicated.

Depth from 1 to 240 mm in 1 mm increments.

Image Rotation EC, UP, P, R

Choose the desired default image orientation.

0 (N)

Normal top to bottom orientation.

90 (W)

left to right orientation.

180 (S)

Inverted bottom to top orientation.

270 (E)

270

right to left orientation.

Image Reverse EC, UP, P, R

Choose the initial default setting of image reverse (left-right orientation).

On or Off.

Zoom Auto Start EC, UP, P

Choose to automatically place the image into the zoom mode after a probe selection
change.

Off

No auto zoom at probe change.

Auto zoom mode at probe change.

Zoom Reference EC, UP, P

Choose the zoom reference image default setting.

On or Off.

Zoom Factor EC, UP, P, R

Choose the default zoom factor for the read (freeze) zoom.

1.0, 1.2, 1.5, 2.0, 2.5, 3.0 or 4.0.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 500

Reviews:

GE Medical Systems 500, User Manual, Page: 418 / 636

Search results

Summary of Contents for 500

Reviews: