manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 163 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 163

Doppler

LOGIQ    500 Basic Users Manual
2276612–100  Rev. 0

5–51

Pulsed Wave Doppler

PW Doppler is typically used for displaying the speed, direction,
and spectral content of blood flow at selected anatomical sites.

PW Doppler operates in two different modes: conventional PW
and High Pulse Repetition Frequency (HPRF).

PW Doppler can be combined with B-Mode for rapidly selecting
the anatomical site for PW Doppler examinations.  This is
described under B/M-Mode operation.  The site where PW
Doppler data is derived appears graphically on the B-Mode
image (Sample Volume Gate).  The site can be moved
anywhere within the B-Mode image.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments