manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 433 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 433

Custom Display

LOGIQ    500 Basic Users Manual
2276612–100  Rev. 0

14–29

Page 8 of 20 (Imaging Parameter 8 – Probe Dependent 8) (cont’d)

PDI Persistence     EC, UP, P, R

Choose the default setting for Persistence, which retains highest color pixel value for a
specified period of time or until a higher value is detected.

OFF, SHORT, MID or HIGH.

PDI MR-Flow     EC, UP, P, R

Choose the default setting of the MR-Flow option (combination focus in PDI color area).

Limited to LA39, C551 (CAE), C358, E721, 739L and 546L probes only.  Must have
ACE-2 option installed.

On or Off.

PDI MR-Flow  Combi Number    EC, UP, P

Set the number of focal zones to be used for the combination focus for MR-Flow option.

2 or 3.

Page 9 of 20 (Imaging Parameter 9 – Probe Dependent 9)

PFD Color Threshold     EC, UP, P, R

Choose a priority level for B-Mode display during PFD mode.  The higher the number,
the greater the emphasis on B-Mode verses PDI Mode.

Choose 0 to 100 in 1 digit increments.

PFD Threshold Power     EC, UP, P, R

Set the threshold value (%) at which power information will start to be displayed.

Set from 0 to 13 percent.

Example:  Setting = 10%; Power values less than 10% will not be displayed.  They will
be set to the background color.  Only power values over 10% will be displayed as color.

PFD Threshold Pulsation     EC, UP, P, R

Set the threshold value (%) at which pulsation information will start to be displayed.

Set from 0 to 100 percent.

Example:  Setting = 20%; Pulsation values less than 20% will not be displayed.  They
will be set to the background color.  Only pulsation values over 20% will be displayed as
color.

PFD Type     EC, UP, P, R

Choose the desired type of the algorithm for detection of PFD.

1, 2 or 3.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments