GE Medical Systems 500 User Manual Download Page 294

Page: 294 / 636

OB Summary Reports

LOGIQ 500 Basic Users Manual

2276612–100 Rev. 0

9–32



USA Only

Two items are different on the OB Summary Report page 2 for
the USA version.

The third line of the top portion will display all of the
LMP, GA and EDD data based on the operator’s input.
For example, if LMP was entered:

LMP (OPE) mm/dd/yy GA (LMP) ##W#D EDD (LMP) mm/dd/yy

will be displayed.

Amniotic Fluid Index (AFI) displays the sum of the 4
measurements and the 4 individual measurement
values.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 500

Reviews:

GE Medical Systems 500, User Manual, Page: 294 / 636

Search results

Summary of Contents for 500

Reviews: