manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 425 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 425

Custom Display

LOGIQ    500 Basic Users Manual
2276612–100  Rev. 0

14–21

Page 4 of 20 (Imaging Parameter 4 – Probe Dependent 4)

PWD/CFM/PDI Penetration     EC, UP, P, R

Choose to have the default for penetration, using the lower probe frequency, for pulsed
Doppler, color flow mapping and power Doppler imaging modes on or off.

Off

Use higher probe frequency.

On

Use lower probe frequency.

PWD/CFM/PDI Slant Auto Start     EC, UP, P, R

Choose the default position of the slant scan window.

Off

Vertical (no slant)

Other-Side

Slanted away from the probe orientation mark

Marker-Side

Slanted toward the probe orientation mark

PWD Gain     EC, UP, P, R

Choose the default gain value for pulsed Doppler Mode.

Value from 0 to 32 in 2 digit increments.

PWD Dynamic Range     EC, UP, P, R

Choose the default dynamic range value for pulsed Doppler Mode.

Value from 18 to 48 in 6 digit increments.

PWD Sample Volume   [mm]     EC, UP, P, R

Choose the default pulsed Doppler sample volume cursor size (in millimeters).

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 or 16.

PWD Gray Scale Map     EC, UP, P, R

Choose the pulsed Doppler Mode gray scale default map.

1, 2, 3, 4, 5, 6, 7, 8, 9 or 10.

PWD Rejection     EC, UP, P, R

Choose the pulsed Doppler Mode rejection default level.

Level from 0 to 40 in 2 digit increments.

PWD Velocity   [cm/s]     EC, UP, P, R

Choose the pulsed Doppler Mode velocity scale default value.

Value from 10 to 1000 in 10 digit increments.

PWD Wall Filter   [cm/s]     EC, UP, P, R

Choose the pulsed Doppler Mode wall filter default value.

0.3, 0.5, 0.7,1.0, 1.5, 2.0, 3.0, 5.0, 7.0, 10, 15, 20, 30 or 50.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments