Home
/
GE Medical Systems
/
500
/
User Manual

GE Medical Systems 500, User Manual, Page: 298 / 636

Share

Page: 298 / 636

GE Medical Systems 500 User Manual Download Page 298

Anatomical Survey

LOGIQ 500 Basic Users Manual

2276612–100 Rev. 0

9–36



Anatomical Survey

Overview

The Anatomical Survey page provides a checklist that promotes
a thorough routine reporting of OB exams.

The header of the page is patient data similar to the
corresponding OB Report page. This information can only be
edited by using the New Patient or ID Name keys.

The third line of the header will be different depending on the
type of OB Report Format selected.

There are 13 pre-programmed and a maximum of 6 user
programmable anatomical features.

Figure 9–12. Anatomical Survey Page

«
...
296
297
298
299
300
...
»

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments