GE Medical Systems 500 User Manual Download Page 450

Page: 450 / 636

Custom Display

LOGIQ 500 Basic Users Manual

2276612–100 Rev. 0

14–46



Page 19 of 20 (Imaging Parameter 19)

ECG Auto Display EC

Choose the initial default setting for the ECG waveform to be displayed on the monitor.

On or Off.

ECG Gain EC, R

Choose the default value for ECG gain.

Value from –20 to +10 in 2 digit increments.

ECG Position EC, R

Choose the default value for the ECG display position (horizontal).

Value from –50 to +50 in 5 digit increments.

ECG Heart Rate Display EC

Choose the initial default setting for the heart rate, calculated from the ECG input, to be
displayed on the monitor.

On or Off.

ECG R Delay 1 [ms] EC, UP, R

Choose the default value in milliseconds for the R wave Delay 1.

Value from 0 to 2000 in 5 digit increments.

ECG R Delay 1 to 2 [ms] EC, UP, R

Choose the default value in milliseconds for the R wave delay between Delay 1 and
Delay 2.

Value from 0 to 2000 in 5 digit increments.

ECG Audio Beat Sound EC, UP

Choose the default setting to represent the ECG input as an audio tone.

On or Off.

ECG Audio Beat Sound Tone EC

Choose as a default the type of tone to be used to represent the ECG input.

Tone-1, tone-2 or tone-3.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 500

Reviews:

GE Medical Systems 500, User Manual, Page: 450 / 636

Search results

Summary of Contents for 500

Reviews: