User Define Function
LOGIQ 500 Basic Users Manual
2276612–100 Rev. 0
14–101
User Define Function
Overview
Six keys in the middle of the right side of the console keyboard
as well as alphanumeric (A/N) keys A
Z 1
0 may be
programmed to duplicate a single keystroke or a sequence of
64 keystrokes maximum.
A keystroke is considered to be a press of a key, one
movement of a knob or movement of the Trackball.
Programming the User Define Function
Access the User Define function by pressing the Set Up
Top Menu Select key.
Select User Define from the Set Up Sub-Menu.
Perform the keystroke or sequence of keystrokes to be
programmed.
When complete, press the desired User Define key number
or A/N key to record the programming.
The system will ask: “Save data? ‘Y’ or ‘N’.” Press ‘Y’ on
the keyboard to save the user define sequence. Press ‘N’
to cancel the user define programming function.
If a sequence is already assigned to the selected key, the
message will be displayed:
“Overwrite Existing data? ‘y’ or ‘n’”
User Define keys that have been programmed will be half
lighted (back lit).
Summary of Contents for 500
Page 1: ... ...