Recording Images
LOGIQ 500 Basic Users Manual
2276612–100 Rev. 0
13–3
Storage (cont’d)
To save images in system memory:
The F1 or F2 key needs to be assigned to the Image Memory
function. The F1 and F2 key presets are found on Set
Up/System Parameters page 3.
Press Freeze to stop image acquisition.
Use the Cine Scroll control, if necessary, to display the best
image.
Press the F1 or F2 key, depending on which has been assigned
for Image Memory. The displayed image is saved to system
memory and the number of images currently stored is displayed
at the bottom of the screen.
The system gives a Memory Full warning beep each time an
image is about to be stored in a full memory.
Pressing F1 or F2 after the warning deletes the oldest image in
system memory and saves the current displayed image.
"
A
Summary of Contents for 500
Page 1: ... ...