Probe Overview
LOGIQ 500 Basic Users Manual
2276612–100 Rev. 0
15–3
Probe orientation
Each probe is provided with an orientation marking (refer to
Figure 15–1). This mark is used to identify the end of the probe
corresponding to the side of the image having the orientation
mark on the display.
1
1
Orientation Marking
Figure 15–1. Orientation Marking on Probe
Labeling
Each probe is labeled with the following information:
Seller’s name and manufacturer
Operating frequency
GE part number
Probe serial number
Month and year of manufacture
Probe designation—provided on the probe grip and the top
of the connector housing, so it is easily read when mounted
on the system and is also automatically displayed on the
screen when the probe is selected.
Summary of Contents for 500
Page 1: ... ...