Preparing for a Biopsy
LOGIQ 500 Basic Users Manual
2276612–100 Rev. 0
15–53
Scanning
1.
Scan the patient. The probe handle orientation mark
indicates the image scan plane. Be sure that the
Image Reverse function is Off.
Figure 15–36. Probe and Guidezone Alignment
2.
Rotate, retract, or advance the probe, as necessary, to
see all pertinent anatomy.
3.
If a biopsy is being performed, activate the biopsy
guidezone.
Scan the patient to determine the correct puncture
depth and site before inserting the needle.
Ensure that the proper guidezone (TV0 or TR5) is
displayed.
Post Biopsy
If the exam is over:
1.
Remove the biopsy guide and twist lock/clamp.
Remove and properly dispose of the sheath.
2.
Thoroughly clean the probe and equipment. Refer to
your institution’s infection control guidelines for
disinfection/sterilization protocols.
3.
After sterilization, return the probe to its carrying case.
CAUTION
Summary of Contents for 500
Page 1: ... ...