manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 427 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 427

Custom Display

LOGIQ    500 Basic Users Manual
2276612–100  Rev. 0

14–23

Page 4 of 20 (Imaging Parameter 4 – Probe Dependent 4) (cont’d)

Auto Optimize with Auto Angle Correct       EC, UP, R,  P

Choose the default setting for the Auto Angle correction while ASO is active.

On or Off.

Auto Optimize with Doppler Auto Invert        EC, UP, R,  P

Choose the default setting for the Doppler Auto Invert function while ASO is active.

On or Off.

Page 5 of 20 (Imaging Parameter 5 – Probe Dependent 5)

CWD Gain     EC, UP, P, R

Choose the default gain value for continuous wave Doppler Mode.

Value from 0 to 32 in 2 digit increments.

CWD Dynamic Range     EC, UP, P, R

Choose the continuous wave Doppler Mode dynamic range default value.

Value from 18 to 48 in 6 digit increments.

CWD Gray Scale Map     EC, UP, P, R

Choose the continuous wave Doppler Mode gray scale default map.

1, 2, 3, 4, 5, 6, 7, 8, 9 or 10.

CWD Rejection     EC, UP, P, R

Choose the continuous wave Doppler Mode rejection default level.

Level from 0 to 40 in 2 digit increments.

CWD Velocity   [cm/s]     EC, UP, P, R

Choose the continuous wave Doppler Mode velocity scale default value.

Value from 10 to 1000 in 10 digit increments.

CWD Wall Filter   [cm/s]     EC, UP, P, R

Choose the continuous wave Doppler Mode wall filter default value.

0.3, 0.5, 0.7, 1.0, 1.5, 2.0, 3.0, 5.0, 7.0, 10, 15, 20, 30 or 50.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments