GE Medical Systems 500 User Manual Download Page 436

Page: 436 / 636

Custom Display

LOGIQ 500 Basic Users Manual

2276612–100 Rev. 0

14–32



Page 11 of 20 (Imaging Parameter 11)

Contrast Mode EC, UP, R, P

Choose the default setting for activating the Contrast Mode when the C358 or S317
probes are active.

On or Off.

Intermittent Auto Start EC, UP, R, P

Choose the default setting for activating the Intermittent scan while dual B mode is
active.

On or Off.

Intermittent Start with Ref. only EC, UP, R, P

Choose the default display when intermittent scan is active.

Snap+Ref.

Display the snap scan and Reference scan.

Ref. Only

Display the Reference scan only.

NOTE: This preset is only available when the Intermittent Auto Start preset is set to
“On”.

Acoustic Power at Intermittent Ref. Scan [%] EC, UP, R, P

Acoustic

Output

Hazard

Choose the default value of the Acoustic power for the reference scan image.

0 – 100 %.

B Gain at Intermittent Ref. Scan EC, UP, R, P

Choose the default value of the Gain for the reference scan image.

Value from 0 to 98 in 2 digit increments.

Intermittent Interval for TimeGate mode [s] EC, UP, R, P

Choose the interval time for the snap scan image taken from the reference image while
ECG is active.

0.5, 01s, 1.5, 02s, 2.5, 03s, 3.5, 04s, 4.5, 05s, 06s, 07s, 08s, 09s or 10s.

Intermittent Interval for ECG mode [Beat] EC, UP, R, P

Choose the interval time for the snap scan image taken from the reference image while
ECG is not active.

01b, 02b, 03b, 04b, 05b, 06b, 07b, 08b, 09b, 10b or 11b.

NOTE: A special option is necessary for the ECG Interval Scan.

Intermittent Ref. Scan with CFM EC, UP, R, P

Choose the default value for the activation of the color area in the reference image.

On or Off.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 500

Reviews:

GE Medical Systems 500, User Manual, Page: 436 / 636

Search results

Summary of Contents for 500

Reviews: