Safety Precautions
LOGIQ 500 Basic Users Manual
2276612–100 Rev. 0
2–13
Classifications (cont’d)
4.2 Notice upon Installation of Product
1.
Use either power supply cords provided by GE Medical
Systems or ones designated by GE Medical Systems.
Products equipped with a power source plug should be
plugged into the fixed power socket which has the
protective grounding conductor. Never use any adaptor
or converter to connect with a power source plug (i.e.
three-prong-to-two-prong converter).
2.
Locate the equipment as far away as possible from
other electronic equipment.
3.
Be sure to use only the cables provided by or
designated by GE Medical Systems. Connect these
cables following the installation procedures (i.e. wire
power cables separately from signal cables).
4.
Lay out the main equipment and other peripherals
following the installation procedures described in the
Option Installation manuals.
4.3 General Notice
1.
Designation of Peripheral Equipment Connectable to
This Product.
The equipment indicated on
13–5
can be hooked up to
the product without compromising its EMC
performance.
Avoid using equipment not designated in the list.
Failure to comply with this instruction may result in poor
EMC performance of the product.
Summary of Contents for 500
Page 1: ... ...